This happens when you go beyond the scheduled oil change distance. Turn the ignition to run (one position before starting engine).
Please follow the instructions below according to your vehicle trim level.
How to reset maintenance light on toyota tacoma 2018. Ensure odometer reading is shown. A check engine light can indicate a broad spectrum of problems with your 2016 toyota tacoma.turn ignition switch to on position while holding down trip meter. Resetting the toyota maintenance required light is fairly easy.
Hold the meter reset until the maint reqd light switches off. These intervals happen at mileage or time intervals (typically every 5000 miles/6 months). The odometer should display the miles, not the trip meter.
While still holding the odometer button, turn the key to the off position. In settings find the maintenance reset option and press. September 13, 2019 by jason.
Press the center button to select settings once it's displayed. Turn the engine switch to the on position while holding down the trip meter reset button. Turn the vehicle off and press the trip meter reset button.
Then, press and hold the odometer button. Turn the engine switch off with the odometer reading shown. The toyota tacoma’s maint reqd light indicates a service interval has been met.
Sokietech shock spring strut rod prop lift support gas hood damper kit for 2016~2021 toyota tacoma n300 pickup truck. There are 2 methods to reset the maintenance reminder on your toyota tacoma. The maintenance required light is standard in all newer toyota vehicles, and helps insure long life and dependability by making sure factory.
How to reset maintenance light on toyota tacoma 2018 guide continue to hold down the odo/ trip button until “000000” miles appears on the display and the maintenance light turns off. Select total mileage on you odometer with the trip odo button. The computer system tracks the engine miles from the time it was reset, and the light will trigger after 5,000 miles of driving.
Use the following steps to reset the maintenance light whenever you have completed an oil change. How to reset maintenance light on a 2010 toyota tacoma. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
Turn the ignition to the on position. You take the service of a toyota dealership for the oil change, they will reset maintenance light toyota for yourself. Then you use the buttons found on the steering wheel to find the settings option.
First, turn your vehicle on and make sure the odometer is displaying miles and not a trip meter. The problem is that there is really no way of knowing unless something has obviously broken. While holding the trip meter reset nob, turn the ignition to 'on', but do not start your toyota tacoma.
Once you have turned the key back off, make sure that you press the trip meter reset button to reset the maintenance required light. The best course of action is to take the car to a mechanic and have them read the trouble codes with an obd scanner. How to reset the toyota maintenance required light.
Toyota recommends not to ignore the light and doing a series of inspections to prevent damages to the engine. To reset the 2005 toyota tacoma maintenance light, please follow these instructions: Then, turn your vehicle off and press and hold the trip meter reset button.
How to reset oil maintenance required light on toyota tacoma. I just finished the oil change, and then now i’m back in the car, and we’re going to do the maintenance. How toyota’s maintenance reminder system works and what to expect.
Turn the ignition key off push the trip reset button and hold wile turning ignition on. This will tell you what is making it come on. The toyota tacoma has a maintenance light that will illuminate on the instrument panel when an oil change is due.
It usually pops up a few miles after you passed the mile mark to change your oil or maintenance. 2018 toyota tacoma maintenance required light. How to reset maintenance light toyota.
How do you reset maintenance light on toyota camry? If the maintenance light, or the check engine light, has come on in the 2018 toyota tacoma then it can mean a great many things. Continue to press and hold the button until the odometer displays 000000.
If the system fails to reset, the light will continue flashing. Press the odometer button for long time. While still pressing the button, turn your keys clockwise.
Press and hold the trip meter reset nob (next to your toyota tacoma's odometer). The sole function of toyota’s maintenance reminder system is to remind the driver to take their car in for an oil change. Hold this button for a while.
Turn your ignition key to the 'acc' or 'lock' position. You can now release the button. On a 2018 toyota tacoma you can reset the change oil light by pressing the push to start button twice in order to enter accessory mode.
To turn off the maintenance light on your toyota tacoma, start by turning the key to the on position.